Water Sensor

Wireless Water Sensor

  • Product Description

    Water Sensor requires additional External Probe for Flood Sensing (wire and internal resistor included)

    Low Temperatures Sensor Product Information

    Ideally suited for applications including bathrooms, laundry rooms, under sinks, and basements, the Water sensor helps protect against temperature fluctuations and flood conditions. The versatile device can be configured to operate as a standalone temperature sensor and/or a remote temperature sensor or flood detector. Fully compatible with Honeywell Total Connect® Remote Services, it can send you emails or text message alerts when detecting floods or extreme temperatures so you can take action to minimize and avert damages. 


    • Five selectable temperature ranges to choose from (hot, warm, cold, refrigerate and freeze) 
    • Remote Temperature Probe available ideal for refrigerator and freezer monitoring
    • Up to 10 year battery life, which reduces user maintenance 
    • Capable of monitoring cold (45°F) temperature and flood detection simultaneously



    • Sensor Parameters
      • Cold Temperature Detector 45°F– When temperature drops below 45°F for >10 minutes
      • Warm Temperature Detector 75°F– When temperature rises above 75°F for >10 minutes
      • Hot Temperature Detector 95°F– When temperature rises above 95°F for >10 minutes
      • Refrigerator Failure Detector 42°F– When temperature rises above 42°F for >30 minutes
      • Freezer Failure Detector 10°F – When temperature rises above 10°F for >30 minutes
      • Flood Sensor – When 1/4" inch of water is covering the 470PB or FP280 probe
      • “Swinger Suppression” (Hysteresis) of 3°F– Temperature difference between fault and restore points
    • Power
      • One 3V battery (included)
      • Replace only with ADEMCO #466, Panasonic CR123A, Sanyo CR123A, Duracell DL123A, Tekcell CR123A or Varta CR123A (Lithium Manganese Dioxide)
    • Operating Temperature: 14°F to 104°F (-10°C to 40°C)
    • Operating Frequency: 345 MHz ± 85 KHz
    • Range of Response time: +50%, -20% -10 minute setting (8-15 min)-30 minute setting (24-45 min) 
    • Dimensions
      • 1.6" W x 3.1" H x 1.0" D (max protrusion) 
      • 40.64mm x 78.74mm x 25.4mm
    • Compatibility: Compatible with all 5800 Series wireless receivers


    *All products are installed and monitored by Custom Alarm.

  • Product Reviews


    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Find Similar Products by Category